As a Pressure Vessel Manufacturer we pride ourselves as being one of the Middle East's top Pressure Vessel Fabricators

AMASCO designs and fabricates Pressure Retaining Items (Pressure Vessels) with regard to Construction and Field Assembly to conform to the requirements specified by the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code (Section VIII Div. 1). AMASCO, as a pressure vessel manufacturer, can also undertake alterations and repairs to Pressure Vessels as per the National Board of Boiler and Pressure Vessel Inspectors - “R” stamp. In 2010, Amasco also achieved certification from DNV to fabricate Class I and II Welded Boilers and Pressure Vessels.

Aweer workshop utilises an EMO 30-30 rolling machine which has a capacity to roll 3m wide and 30mm thick high tensile plate - down to a minimum ID of 660 mm. The machine compliments our ASME Certification for “U”’ “PP”, “R”, “NB” and “S” certified works on pressure vessels. It also has excellent pre-pinch capabilities to avoid “flat-end” wastage. The 6m x 6m Column & Boom welding manipulator in Aweer workshop with 100 ton rotators, fitted on rails down the entire length of the workshop, allows us to produce Process Towers and vessels of up to 30 metres in height / length. The heaviest item produced so far weighed 60 ton and was 23 metres in height with a shell thickness of 65 mm - An Amine Contactor. Road restrictions limit the maximum diameter produced to 5.0 metres

UAQ workshop has a 3 metre width x 16mm rolling machine for lighter vessels. Our PWHT furnace, large vessel hydrotesting facility and blasting & coating room are also situated at UAQ for completion of the larger vessels after fabrication in Aweer workshop and prior to delivery to the client, by road or by barge from our quayside.